So I noticed this when I started using the controller, when you place it on a flat surface does it teeter for other people? Mine is small on the LT side and it’s bugging the daylights outta me. Is this the way all the controllers are? or is it just me?
Here are the two pictures from each side that I got showing the teeter (It might not be noticeable looking at it)
Bottom View
Top View
Mine lays level like the other controllers. Do you have a headset adapter or anything else attached to it that might be throwing it off balance?
Mine is level as well
> 2661949065475413;2:
> Mine lays level like the other controllers. Do you have a headset adapter or anything else attached to it that might be throwing it off balance?
I do but when I unplug it, it still teeters, I have really bad OCD so I might return to get other one, but sadly I already used the REQ code so would I still be able to?
Did you buy a Chief or Locke controller? Not sure if there’s any difference between the two but my Locke controller sits flat, as expected.
> 2533274894580994;4:
> > 2661949065475413;2:
> > Mine lays level like the other controllers. Do you have a headset adapter or anything else attached to it that might be throwing it off balance?
>
>
> I do but when I unplug it, it still teeters, I have really bad OCD so I might return to get other one, but sadly I already used the REQ code so would I still be able to?
Depends on the retailer I suppose. I’m honestly curious as to how it’s teetering… That sounds like the plastic wasn’t molded properly and is warped on one side.
> 2533274819029930;5:
> Did you buy a Chief or Locke controller? Not sure if there’s any difference between the two but my Locke controller sits flat, as expected.
I bought the Locke version.
> 2661949065475413;6:
> > 2533274894580994;4:
> > > 2661949065475413;2:
> > > Mine lays level like the other controllers. Do you have a headset adapter or anything else attached to it that might be throwing it off balance?
> >
> >
> > I do but when I unplug it, it still teeters, I have really bad OCD so I might return to get other one, but sadly I already used the REQ code so would I still be able to?
>
>
> Depends on the retailer I suppose. I’m honestly curious as to how it’s teetering… That sounds like the plastic wasn’t molded properly and is warped on one side.
Do you know if I would be able to return it in for the same model?
> 2533274894580994;8:
> > 2661949065475413;6:
> > > 2533274894580994;4:
> > > > 2661949065475413;2:
> > > > Mine lays level like the other controllers. Do you have a headset adapter or anything else attached to it that might be throwing it off balance?
> > >
> > >
> > > I do but when I unplug it, it still teeters, I have really bad OCD so I might return to get other one, but sadly I already used the REQ code so would I still be able to?
> >
> >
> > Depends on the retailer I suppose. I’m honestly curious as to how it’s teetering… That sounds like the plastic wasn’t molded properly and is warped on one side.
>
>
> Do you know if I would be able to return it in for the same model?
Did you buy it from a store or order offline?
> 2661949065475413;9:
> > 2533274894580994;8:
> > > 2661949065475413;6:
> > > > 2533274894580994;4:
> > > > > 2661949065475413;2:
> > > > > Mine lays level like the other controllers. Do you have a headset adapter or anything else attached to it that might be throwing it off balance?
> > > >
> > > >
> > > > I do but when I unplug it, it still teeters, I have really bad OCD so I might return to get other one, but sadly I already used the REQ code so would I still be able to?
> > >
> > >
> > > Depends on the retailer I suppose. I’m honestly curious as to how it’s teetering… That sounds like the plastic wasn’t molded properly and is warped on one side.
> >
> >
> > Do you know if I would be able to return it in for the same model?
>
>
> Did you buy it from a store or order offline?
I bought it in a GameStop today/yesterday, it was a physical store
> 2533274894580994;10:
> > 2661949065475413;9:
> > > 2533274894580994;8:
> > > > 2661949065475413;6:
> > > > > 2533274894580994;4:
> > > > > > 2661949065475413;2:
> > > > > > Mine lays level like the other controllers. Do you have a headset adapter or anything else attached to it that might be throwing it off balance?
> > > > >
> > > > >
> > > > > I do but when I unplug it, it still teeters, I have really bad OCD so I might return to get other one, but sadly I already used the REQ code so would I still be able to?
> > > >
> > > >
> > > > Depends on the retailer I suppose. I’m honestly curious as to how it’s teetering… That sounds like the plastic wasn’t molded properly and is warped on one side.
> > >
> > >
> > > Do you know if I would be able to return it in for the same model?
> >
> >
> > Did you buy it from a store or order offline?
>
>
> I bought it in a GameStop today/yesterday, it was a physical store
Worth a try at least. You can probably bring in a controller with it to show them how it’s supposed to sit, then just lay out how the plastic is warped and maybe throw in a lie about how the button response time feels off. If it’s just a direct exchange, I wouldn’t expect them to have a problem with it. Then again, it being Gamestop, so they might hassle you over REQ code.
I bought the Locke controller, but it has a release date of the 20th here… how the heck do you guys have them already? O.o
Pics or it didn’t happen.
That being said, it could just be an early mold and it could be off slightly.
> 2661949065475413;11:
> > 2533274894580994;10:
> > > 2661949065475413;9:
> > > > 2533274894580994;8:
> > > > > 2661949065475413;6:
> > > > > > 2533274894580994;4:
> > > > > > > 2661949065475413;2:
> > > > > > > Mine lays level like the other controllers. Do you have a headset adapter or anything else attached to it that might be throwing it off balance?
> > > > > >
> > > > > >
> > > > > > I do but when I unplug it, it still teeters, I have really bad OCD so I might return to get other one, but sadly I already used the REQ code so would I still be able to?
> > > > >
> > > > >
> > > > > Depends on the retailer I suppose. I’m honestly curious as to how it’s teetering… That sounds like the plastic wasn’t molded properly and is warped on one side.
> > > >
> > > >
> > > > Do you know if I would be able to return it in for the same model?
> > >
> > >
> > > Did you buy it from a store or order offline?
> >
> >
> > I bought it in a GameStop today/yesterday, it was a physical store
>
>
> Worth a try at least. You can probably bring in a controller with it to show them how it’s supposed to sit, then just lay out how the plastic is warped and maybe throw in a lie about how the button response time feels off. If it’s just a direct exchange, I wouldn’t expect them to have a problem with it. Then again, it being Gamestop, so they might hassle you over REQ code.
Yeah… I mean looking at the Controller the other side where the front and back are attached look father apart as the other side does… I probably just got very unlucky 
> 2535447317427844;13:
> Pics or it didn’t happen.
>
> That being said, it could just be an early mold and it could be off slightly.
I’m working on the pictures now but it’s very hard to see the difference of it on one side towards the other. It’s a slight teeter but it bugs me so much.
Mine sits flat, that’s really weird that it does that OP
> 2533274887515153;16:
> Mine sits flat, that’s really weird that it does that OP
Unlucky me is unlucky
For christ sake dude, look I understand the ‘OCD’ part of it, but why the hell are you staring at your controller as it sits on the table? Put it on one of those charge docks then, it won’t be on the ground. You’re not ‘unlucky’, it’s nothing but a VERY minor issue that really isn’t even an issue. ugh
> 2535447317427844;18:
> For christ sake dude, look I understand the ‘OCD’ part of it, but why the hell are you staring at your controller as it sits on the table? Put it on one of those charge docks then, it won’t be on the ground. You’re not ‘unlucky’, it’s nothing but a VERY minor issue that really isn’t even an issue. ugh
I don’t look at it, I feel it as I put it down and pick it up. I don’t have a controller stand nor do I plan on getting one. It’s the lingering thought that the teeter is there. Call me crazy but it’s a pet peeve I have.
> 2533274894580994;1:
> So I noticed this when I started using the controller, when you place it on a flat surface does it teeter for other people? Mine is small on the LT side and it’s bugging the daylights outta me. Is this the way all the controllers are? or is it just me?
>
> Here are the two pictures from each side that I got showing the teeter (It might not be noticeable looking at it)
>
> Bottom View
>
> Redirecting...
>
> Redirecting...
>
> Top View
>
> Redirecting...
>
> Redirecting...
Maybe your table isn’t level