I want to make a real life replica of the arbiters armor from halo 2 and 3 dose any one have any detailed pictures or advise
ps i dont want any thing too expensive
Why is this in the Reach thread?
cuse the halo 3 one sucks
So you’re asking someone to make you a Arbiter armor? Good luck on getting someone to make you one that will cost alot of money.
i dont want them to make it i jest wat detaled pictures and advice
i want deaitaled pictors and some advise on how to make the arbiters armor from halo2 and 3
I reluctantly participate in this conversation with the hope that this is for some class project or that you are being extremely proactive in planning your next Halloween costume.
First, get ideas on Google or Youtube by searching “how to make my own H2/ H3 Arbiter armor”. I’m sure someone has done it (or at least tried it) before, especially since it would be much easier than the real-life Warthogs people have built.
If you have to work from scrach, you can Google images for H2/H3 Arbiter. There are thousands that you can look at, from any angle. Since you’re not an Elite, your knees are not designed for this armor. Plan accordingly; this outfit would need give the illusion that you have the legs of an Elite while also allowing you to walk normally. Similar planning is needed for the helmet, as I asume your mouth looks more like mine. I suggest you superimpose an outline of your body onto several several angles of an Arbiter image and customize from there. don’t forget that it has to be designed for you on the inside.
Assuming you don’t have the equipment or budget to cast your own armor pieces, the best alternatives I can think of would be to look for used sports equipment, old kitchen supplies, aluminum cans, cardboard, and spent plastic containers that you can cut, shave, screw, glue, sand down, paint or otherwise alter to create your armor. Remember the Carpenter’s Rule: Measure twice, cut once."
Further assuming that your budget resembles something of an allowance more than a paycheck, I suggest you start with free supplies that you find around the house, the local junkyard, then goodwill or used on-line shopping. Your final creation will directly reflect your imagination.
Last, I suggest that you lower your standards and disregard the notion that you will be able to recreate an exact replica, as you would need professional equiptment or a decent 3-D printer to do that.
I don’t mean to discourage you from doing it, I just suggest that you be realistic about what is possible with limited funds, tools, and experience. It is still a good project to undertake that can stretch your ability to see one thing and imagine it altered to suit your needs. It would also increase your scrounging abilities and help you appreciate materials and complex fabrication.
DON’T FORGET TO THANK THOSE OF US WHO OFFER HELP AND ADVISE. IF YOU DECIDE TO DO THIS, YOU CAN REWARD US BY SENDING US A PM AND POSTING A PICTURE OF THE FINAL PRODUCT
GOOD LUCK!
> cuse the halo 3 one sucks
That’s not an excuse.
Halo 2 is Halo 2.
thanks for all the advise much appreciated
mainly i jest want the helmet and the chest piece and again thanx for the help
when i finish the helmet (witch will take some time i willpost a pictor
> thanks for all the advise much appreciated
No problem, so click “Thanks” on my post.
Id say that the HAlo Wars Arbiter has great detail if that helps?
ya but the armor is not the same